QUESTIONS & ANSWERSAsk a Question
G'day, I have a 2013 Isuzu DMax and have seen LED headlights which beat the better "white light" halogens for light output. I would like to change mine over to LED also. Do you have the conversion kits for my vehicle and if so, what would be the cost please. I think the globes are : Low beam - HB3 and High beam - H7. Regards, Roy.
Hi, Yest we do have HB3(9005) and H7 LED conversion Kit in stock, they are $59.90 a set each with free shipping via Australia Post.
i have a 2011 i30 will this conversion keep in touch work for the i30
Hi, our database shows 2011 Hyundai i30 uses H1 for high beam and H7 for low beam which we have in stock. If the owner's manual tells you the vehicle uses 9005 HB3 for high beam, then this our 9005 conversion kit will fit.
I have a 2016 Hilux SR5 and the high beams are lousy. Looking to upgrade. They are HB3 60W at the moment. Are these LED's going to give me whiter brighter light?
Hi, Our LED bulbs have colour temperature of 5800K which is pure white, the colour is similar to what you see on a overcast sky. We've tested our bulbs against 60W Narva halogen bulbs on the same headlamp and the LED produces roughtly 50% higher lux.
I have a 2015 Subaru XV base model that runs halogen headlights - low beam H11 12v 55w & high beam HB3 12v 60w. Will your LEDs H11 & HB3 suit my car? Are they basically plug and play or what? Does my car need a can bus converter?
Thank You for your enquiry! Yes our conversion kit is suitable for your Subaru XV's high and low beam without the need of canbus decoder. They are plug & play and comes with LED drivers that can be easily secured.
Please follow the link below to check out how I secure the Driver for my car's LED high beam.
You can easily access the bulb by removing the windshield wiper fluid tube
You can access the bulb by removing two clips on the air box then remove the air box to get full access to both high and low beam bulbs.
If you have any further questions please feel free to contact me.
Are these CANbus compatible
Hi there, our conversion kits do not have CANbus error cancellation function but they can work with external warning cancellers.
Hi, can you please advise of the base measurements (diameter and distance from mounting face) in mm? Thanks
The diamater is 32mm and the distance from the mounting face to the base is 30mm
are 9005 bulbs suitable for 2018 kluger
Yes, it is compatible with the 2018 Toyota Kluger's highbeam
Hi mate I have 2012 kluger will the hb3 be suitable for the hb .
Yest the HB3 is suitable for the 2012 Kluger's high beam
I have a 2010 Toyota 150 Prado, will the 9005 HB3 be suitable for the high beam globe replacement?
They are compatible if your 2010 150 Prado takes 9005 halogen
Will Hb3 led kit fit outlander
Please specify the year and series of your outlander, our database shows there are multiple model of bulbs used on the outlander.
I would like to improve the lighting on my new KIA Sportage MY19 2L petrol. It currently specifies HB3 60w and it drives both high & low with one globe. What do you recommend without interfering with the warranty. Does your LED replacement kit produce more heat but draw less current? Regards
For the warranty part different manufacturers have different rules for the coverage, I highly recommend you to contact Kia's customer support to find out what you can or cannot do. LEDs actually draw less current and subsequently producess less heat than halogen. Finally I believe Kia uses special adapters on their bulbs for all Lens type headlight, you can check if this is the case by referring to the owner's manual.
0will the hb3 fit my ba falcon
Hi, it will fit the Ford ba Falcon.